Pool plastering is the best way to give a pool in need of a remodel a good look. Pool plastering is not a particularly new way to resurface a swimming pool, but it is very popular. What is new, however, is the number of different plasters available nowadays. For example, the traditional white pool plaster consists of white marble aggregate, white cement and water. This choice is the most normal choice to take, but one disadvantage of this particular plaster is that it deteriorates pretty quickly.
The pool plaster is the most important part of the swimming pool, many would argue because it is the plaster that everyone sees touches and swims above. Getting this put down properly and professionally can be a hard time by yourself, so it is best to hire the best in the business, for example, the companies who set up hotel swimming pools and professionals from companies like orange county pool plastering.
After you have set up the plaster it is best to gently brush it with a nylon brush carefully to improve the quality of the plaster effectively. Doing this will also stop some of the chemicals and minerals such as calcium from being deposited in your pool water, along with normal precipitation.
If there is sand at the bottom of your pool it is common for it to actually be precipitation. This usually occurs within new swimming pools. It is best to brush the pool floor and walls 2 times or more a day for the first 7 days, but some building packages may include this.
Having the correct pH scales is essential to not damaging the plaster floor. Water that is below 7.0 on the pH scale is highly likely to erode the smooth platina from the surface of the plaster. On the other hand, if the water is above 8.0 on the pH scale the plaster floor is highly susceptible to stains and scale on the surface. One element that affects this scale is calcium, which has to be right for the pH scale to be at the perfect amount. The most effective calcium amount is 250ppm. If there is too little of the calcium the plaster could weaken and if there is too much there will likely be deposits on the pool plaster.
Most stains can be taken away using bleach; those that can’t are most likely metal stains. This will occur when the water is saturated with a certain ore, whether it be iron or copper and the metal will precipitate.
Another time of stain that could occur is an organic stain, which stains the surface for a short period of time. Nearby plants will stain the surface with chlorophyll stains or tannic acid stains. The use of chlorine will wipe these out of the water, unlike metal.
You might remove water after a day or two, which could cause some tiny cracks to appear on the surface. This is a natural occurrence because naturally, the plaster will shrink after it has been applied. This may be filled with multiple materials, but it is unlikely to be warranted by the building company.